|
MHU Series Humidity Chamber
- Terchy has achieved a perfect design
The rounded corners of the front face give a pleasing appearance the bump-free. Smoothly locking door has a flush surface that is free from any protrusions such as handles.
- Large sight window for easy viewing
A fluorescent lamp is applied to light inside the chamber and increase the brightness. Glass with a heat generator is used as the window. The heater is automatically activated depending on the temperature setting to prevent blur and save wiper operation, you can always observe the chamber from the sight window under the best conditions.
- Complete safety is assured
The new design separates the water supply circuit for humidification from the electric circuits.
- Time singal relay contactor is located on the lower part of the side face of the chamber. (max. current 2A)
- Convenient water tank
The water tank is incorporated on the lower part of the back face of the chamber. Users can supply water easily by refilling tanks.
| Temp. range |
: |
-20 ~ 100 °C, -40 ~ 100 °C, -70 ~ 100 °C (150 °C) |
| Humid. Range |
: |
20 ~ 98%RH (5% ~ 98%RH) |
| Constancy |
: |
±0.3 °C ±2.5%RH |
| Volume |
: |
150L, 225L, 408L, 800L |
| Memory-Capacity |
: |
Max. 100 programs, 800 Steps in total. |
| Material |
: |
Stainless steel plate (SUS 304) |
Salt Spray Tester
The Salt Spray Tester is to test the anti-erosion quality of the surface of all materials, after the rust-proofing of painting, coating, electroplating, anoding and rust-proof greasing.
|
|
